ETKF
Design
Features
* Bare Shaft Centrifugal Pumps. (DIN 24255)
• ETKF series pumps has designed for pumping non-abrasive and small particulars liquids.
• ETKF series pump has just one impeller, pump and motor is connecting by coupling. It gives yours avantages for easy disassembling.
• Pump Dimensions are according to EN 733 - DIN 24255 standard.
• Input and output flange dimensions are acceptable IEN 1092-2/PN 16.
• ETKF series is off the wheel and wheel balancing holes in the wings to minimize ta axial loads, dynamic loads are balanced within.
• Sealing is provided by gland packing. Sealing is provided by also mechanical seal as customer request.
• Easy dissasamble to pump and change impeller, bearings and seals.
•All impellers are statically and dynamically balanced according to ISO 1940 class 6.3.
•In addition to 29 models, 10 complementary models are designed in according to EN 733 standards. The main dimensions of complementary models may different from other manufacturers.
• Direction of rotation is clockwise viewed from the driver end.
• Optionally, pumps can be manufactured with shaft bushings and/or wear rings.
Features
* Bare Shaft Centrifugal Pumps. (DIN 24255)
• ETKF series pumps has designed for pumping non-abrasive and small particulars liquids.
• ETKF series pump has just one impeller, pump and motor is connecting by coupling. It gives yours avantages for easy disassembling.
• Pump Dimensions are according to EN 733 - DIN 24255 standard.
• Input and output flange dimensions are acceptable IEN 1092-2/PN 16.
• ETKF series is off the wheel and wheel balancing holes in the wings to minimize ta axial loads, dynamic loads are balanced within.
• Sealing is provided by gland packing. Sealing is provided by also mechanical seal as customer request.
• Easy dissasamble to pump and change impeller, bearings and seals.
•All impellers are statically and dynamically balanced according to ISO 1940 class 6.3.
•In addition to 29 models, 10 complementary models are designed in according to EN 733 standards. The main dimensions of complementary models may different from other manufacturers.
• Direction of rotation is clockwise viewed from the driver end.
• Optionally, pumps can be manufactured with shaft bushings and/or wear rings.